” 700 E-Raptor “
Raptor In a Box
Level 3, 700 E-Raptor Super Master Rebuild Kit
#803. Included in the kit is everything you need to build our level 3 original 700 E-Raptor Transmission, the electronic version of the worlds first true performance 700R4 transmission.
This kit is for 1993 to 2008 4L60E transmissions only.
Here’s what you get, the Fairbanks oversize billet intermediate servo, the Fairbanks oversize billet overdrive servo and the Sonnax oversize .490″ pressure valve. You get a billet steel 13 vane pump rotor that will take care of the exploding rotor problem forever on high output motors. Also included is a pump seal retainer and pump bushing, Borg Warner 29 element forward sprag, new low / reverse roller clutch, and a #11CF Alto carbon fiber Power Band.
This kit comes with a complete thrust washer kit, High Energy master rebuild kit with an Alto Red Eagle 3-4 clutch Power Pack that has Kolene steels and Sonnax heavy duty pressure plates.
The master kit comes with all TransTec gaskets, seals and rings. Also included are the bonded pistons to accompany the ring kit.
You get a filter, Beast Shell, extra wide rear stator support bushing, double wide sun gear bushing, 3 new accumulator pistons, Transgo separator plate, 2 performance accumulator springs, servo release check valve kit and a performance pump slide spring.
And last but not least, you also get a special valve that will fix the 1870 code problem for good.
After many years of research and development these parts where determined to work together best for a long lasting transmission. When we pull the parts to build a 700 E-Raptor transmission this is the exact parts list.