#9313-AC Transmission Pan, 4L80E / 4L85E, PML Low Profile As-Cast

$ 250.00

SKU: TP-ASM-9313-AC, #9313-AC, #3X Categories: , Tags: , ,

Description

#9313-AC Transmission Pan, 4L80E / 4L85E, PML Low Profile As-Cast

PML transmission pans feature sand-cast aluminum construction with raised fins, thick walls to add strength to the transmission case, and a machined gasket surface for a secure seal.

Volume: 1.5 qts. over stock

Dimensions: The distance from the flange surface to the inside bottom of the pan is approximately 2.75 inches. This is the same as the stock pan so the bottom of the pan supports the filter.

Number of Bolts: 17

This PML pan fits GM and Chevrolet 1996 and older vehicles with the 4L80E and 4L85E transmission. PML also makes a deeper pan with more capacity for these applications. See part number 9167 for information on that pan.

This pan can be used on 1997 and newer vehicles if there is enough clearance between frame cross member and stock pan. Most 1997 and newer vehicles do not have enough clearance and need the late model pan. Part number 9437 provides clearance for the exhaust but will not clear the transmission internals on the early models.

This pan can fit on 1993 to 1996 H1 Hummers, but the frame cross member is very close and you will need to check the drain plug location. On a previous revision of this pan, the drain plug was on the bottom, which required a hole to be cut in the frame cross member to allow the pan to drain. The drain plug is now on the side and may be easier to access.