Description
Sonnax 34500-Z, 4L80E / 4L85E / TH400 Front And Rear Unit Endplay Shim.
It is often difficult to reduce front unit endplay on GM TH400 or 4L80-E and 4L85-E transmission units with excessive spline wear.
Normal component wear allows excess forward drum and direct drum travel. This travel or also called “free-play” reduces sealing ring life. These transmission units are limited on the thickness of pump shim material that can be added. Excessive shimming at the pump will push the forward drum off the rings and result in a burnt forward clutch.
But Sonnax offers .010″ thick front/rear unit endplay shim 34500-Z that can be stacked under the sun gear bearing race.
- By lifting the sun gear, the drums are also supported and front unit endplay is reduced.
- The shim can be installed between the sun gear thrust bearing and the rear internal gear during lower unit assembly.
- Updated design which fits all model years
Package contents: 10 shims
- Material: Steel
- Tang Count: 3
- Inner Dia.: 1.165″
- Thickness: 0.010″
- Outer Dia.: 1.940″
Transmission Fitment:
| NAME: | YEARS: |
|---|---|
| THM400 | 1965 – 1992 |
| 4L80-E | 1991 – 2009 |
| 4L80-E-HD/MN8 | 2002 – 2002 |
| THM-R2/MT1 | 1991 – 1991 |
| 4L85-E | 2002 – 2009 |
| 3L80 | 1992 – 1993 |
Click Here For More Sonnax Products!
