Description
Mercedes 722.6, Chrysler NAG1
Hi-Performance Friction/Steel Module
1996-ON
**Rated up to 750HP**
IMPORTANT INFORMATION:
The 141750HP is designed to be a drop in, no machining required Hi-Performance kit.
This kit has been thoroughly tested & is rated up to 750HP & 750 Ft. Lbs. of Torque.
If your application is rated higher than that, internal component & valve body modifications as well as additional clutch plates will be required.
Pre-soak friction plates for at least 20 minutes in the manufacturer’s recommended ATF.
Kit Contents:
(8) 141740-160 (.063” / 1.60mm) K1 Clutch Red Eagle® Frictions
(8) 141701K180 (.071” / 1.80mm) K1 Clutch Kolene® Steel Plates
(1) 141761X K1 Clutch Stepped Pressure Plate
(5) 141740-160 (.063” / 1.60mm) B1 Clutch Red Eagle® Frictions
(5) 141701K180 (.071” / 1.80mm) B1 Clutch Kolene® Steel Plates
(1) 141701K350 (.138” / 3.50mm) B1 Clutch Kolene® Steel Plate
(9) 141746A160 (.063” / 1.60mm) K2 Clutch Red Eagle® Frictions
(9) 141707K180 (.071” / 1.80mm) K2 Clutch Kolene® Steel Plates
(1) 141707K280 (.110” / 2.80mm) K2 Clutch Kolene® Steel Plate
(1) 141250 (.086” / 2.20mm) K2 Clutch Snap Ring
(7) 141748-160 (.063” / 1.60mm) K3 Clutch Red Eagle® Frictions
(7) 141709K180 (.071” / 1.80mm) K3 Clutch Kolene® Steel Plates
(1) 141709K400 (.157” / 4.0mm) K3 Clutch Kolene® Steel Plate
(1) 141251 (.075” / 1.90mm) K3 Clutch Snap Ring
(6) 141742-160 (.063” / 1.60mm) B2 Clutch Red Eagle® Frictions
(5) 141703K180 (.071” / 1.80mm) B2 Clutch Kolene® Steel Plates
(1) 141762X B2 Clutch Stepped Pressure Plate
(5) 141704-160 (.063” / 1.60mm) B3 Clutch High Energy Frictions
(5) 141705-180 (.071” / 1.80mm) B3 Clutch Steel Plates
