GM 4L60 4L65 4L70E Alto Commercial Super Master Rebuild Transmission Kit 2004+

4L60E 4L65E 4L70E

Transmission Rebuild Kit

Commercial Performance Combo

Includes 9-Clutch 3-4 Clutch Commercial Pack

fits GM vehicles 2004-up

This fantastic Performance Combo Includes the Following:

• (1) Overhaul Kit with Gaskets and Seals from Precision International
• (1) Friction and Steel Clutch Plate Set – High Energy from Alto (with 3-4 Commercial Clutch Pack)
• (1) 2-4 Band —WIDE— 2-5/8" Red Eagle Friction Material from Alto
• (1) Filter from Raybestos

Precision International – Overhaul Kit Contents:

• (1) Pump Gasket
• (1) Pump O-ring Yellow Stripe
• (1) Wedge-type bonded Pump-to-Case Seal
• Extension Housing-to-case O-ring Orange Stripe
• Set of Valve Body Gaskets
• (1) Heavy Duty Farpak (Fiber) Pan Gasket
• (1) Servo Assembly Seal Set with O-rings and Sealing Rings
• (1) Servo release spring HD (crisp and clean shifts due to no band drag)
• (5) Metal-clad seals (Torque converter to pump, 2WD driveshaft yoke, manual lever shaft, filter neck)
• (1) 12-piece PTFE Sealing Ring Kit
• (4) Valve body screen "thimble" filters
• (1) Cooler Line Fitting rebuild kit with Retaining Clips and O-rings
• Lip Seals, o-rings and other small parts
• Pump Rotor/Slide Sealing Parts

Alto Performance Band

• (1) 2-5/8" WIDE 2-4 Band with famous Red Eagle® Lining

Alto – High Energy Gray (HEG) Clutch Kit with Commercial 3-4 PowerPack®

PowerPack® Components:

• (9) 057734-158 HEG Friction Clutch Plates – 0.062"/1.57mm
• (8) 057725A Steel Clutch Plates – 0.060"/1.52mm
• (2) 057725 Steel Clutch Plates – 0.078"/1.98mm (to help set proper clearances)
• (1) 057713 Apply Plate (Flat) – 0.125"/3.18mm
• (1) Snap Ring

Low/Reverse, Forward, Overrun, Reverse Input Packs:

• (5) 057738-220 Low/Reverse HEG Friction Clutch Plates – 0.087"/2.21mm (25T)(6.47"OD)
• (5) 032701 Low/Reverse Steel Clutch Plates – 0.068"/2.73mm (17T)(5.73"ID)
• (5) 057730-180 Forward HEG Friction Clutch Plates – 0.070"/1.78mm (41T)(5.31"OD)
• (5) 057721 Forward Clutch Steel Plates – 0.091"/2.31mm (20T)(4.26"ID)
• (2) 057736-200 Overrun Clutch HEG Friction Clutch Plates – 0.075"/1.91mm (20T)(5.04"OD)
• (2) 057707 Overrun Clutch Steel Plates – 0.091"/2.31mm (10T)(4.26"ID)
• (4) 057732-180 Reverse Input HEG Friction Clutch Plates – 0.070"/1.78mm (41T)(6.04"OD)
• (4) 057703 Reverse Input Steel Clutch Plates – 0.078"/1.98mm (36T)(5.08"ID)

Please visit our store for more great components for your projects!