Sonnax 77733-12KA Smart-Tech Input Housing Kit with Heavy Duty Input Shaft, 4L60E, 4L65E, 4L70E

$ 164.09

Out of stock


Sonnax 77733-12KA Smart-Tech Input Housing Kit with Heavy Duty Input Shaft, 4L60E, 4L65E, 4L70E

Fits 300mm reluctor-style units only.

Limitations of the GM 4L60E, 4L65E, 4L70E OE input housing are the root cause of 3-4 burn-up in performance applications. The weak OE backing plate flexes during clutch apply, allowing heat to build up unevenly within the clutch pack’s limited space. Stop the flex and you stop 3-4 clutch failure. The unique Sonnax Smart-Tech housing design makes room for a taller clutch pack anchored in place by a stronger backing plate, making it the only way to increase clutch capacity and protect against destructive heat. Numerous other improvements to the housing ensure maximum durability and protection against failure in higher horsepower, higher pressure applications.

Smart-Tech input housing kit with heavy duty input shaft 77733-12KA fits 300mm reluctor-style units only. The high-strength shaft features many unique refinements available only from Sonnax, including a unique design that protects against failure from stress cracks. Both the housing and shaft also are available separately.

  • Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:
    • Eight .067″ frictions with seven .095″ steels
    • Nine .062″ frictions with eight .077″ steels
  • Anchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up
  • Treated housing is significantly more resistant to fatigue failure
  • Steel reinforcement sleeve prevents breakage in the spline area
  • Custom backing plate replaces OE retaining ring to eliminate risk of blowout

Requires ’91-later 3-4 apply ring; Requires ’97-later ring gear; Requires ’97-later stamped steel forward piston. Cannot be used with aluminum forward piston or Sonnax billet forward piston 77764-01. See instructions for further detail.

  • PTFE Impregnated Rear Stator Support Bushing
  • Input Drum Reinforcement Sleeve installed
  • Overrun Piston Inner Seal
  • Overrun Piston Outer Seal
  • 3-4 Clutch Apply Plate
  • 3-4 Clutch Return Springs (10)
  • Bolt-on Anchor Plate
  • Socket Head Cap Screws (15)
  • Overrun Piston
  • Smart-Tech Input Housing with 300mm Reluctor-Style Input Shaft Assembly

Additional information

Weight 10 lbs
Dimensions 8 × 8 × 20 in