* 86C, Allison Mega Transmission Cooler

$ 260.00

 

Add Cooler Fittings ?

SKU: TS OC-1260, a20 ra b31 Categories: , Tag:

Description

#86C, Allison Mega Transmission Cooler, 24″ x 12-3/4″ x 1-1/2″, Built with Large Tubes for Maximum Cooler Flow.

High flow rates up to 20 gallon per minute.

3/4 inch female fittings in cooler. Includes Cooler and Brackets only.

If needed, Add the Cooler Fittings on the “Add On” above.

Installation instructions for the #86C Allison 1000 transmission cooler.

A 2007 back is a straight forward installation and similar to the 2008 up.

This installation is on a 2008 up 3/4 ton truck.

Picture:
#1 remove the grill and disconnect the cooler lines. Then remove the factory cooler. 

#2 cut the grill bracket on the right and left sides.

#3 heat bracket as shown.

#4 bend to the front one inch.

#5 heat the other side.

#6 bend the other side out.

#7 & #8 test fit the new cooler. The cooler goes off center to your right.

#9 install cooler brackets supplied.

#10 brackets and adapter fittings installed.

#11 place a small piece of filler metal between cut grill bracket then weld the right and left sides.

#12 welded grill bracket.

#13 install the cooler lines and make sure there are no bolts close to the air conditioning condenser.

#14 finished job, install the grill and check your transmission fluid.

We installed the cooler and a cast aluminum transmission pan on the same day. The owner reported back to us four days later with a 30 degree drop in operating temperature.


Additional information

Weight 14 lbs
Dimensions 24 × 16 × 6 in