Raptor In a Box
Level 3, 700 Raptor Super Master Rebuild Kit
# 660. Included in the kit is everything you need to build our level 3 original 700 Raptor Transmission the worlds first true performance 700R4 transmission. This kit is for 1987 to 1993 700R4 transmissions only. Here’s what you get, the Fairbanks oversize billet intermediate servo and the Fairbanks oversize billet overdrive servo. The Sonnax oversize .500″ pressure valve and oversize low / reverse pressure valve. A Sonnax elevated pressure regulator spring plus a 10 vane pump rotor and vane kit (A74531AK). Also included is a pump seal retainer and pump bushing, Borg Warner 29 element forward sprag, new low / reverse roller clutch, # 11CF Alto carbon fiber Power Band. This kit comes with a torque converter lock-up kit, complete thrust washer kit, High Energy Master rebuild kit with an Alto Red Eagle 3-4 clutch Power Pack that has Kolene steels. The master kit comes with all Alto gaskets, seals and rings. You get a filter, Beast shell, extra wide rear stator support bushing, double wide sun gear bushing, 2 new accumulator pistons, Transgo separator plate, 2 performance accumulator springs, performance pump slide spring and a Corvette governor. Following small parts also included, a case connector, a case bushing, plastic vent tube, a check valve and 2 hardened pump rings.
As an added bonus you get a discount. After many years of research and development these parts were determined to work together best for a long lasting transmission. When we pull the parts to build a 700 Raptor transmission this is the exact parts list.