Sonnax 22771-12K, 47RE / 47RH / 48RE / 727 Valve Body Detent Ball And Sleeve Kit

$ 12.00

SONNAX Logo

Description

47RE / 47RH / 48RE / 727 Valve Body Detent Ball And Sleeve Kit, Sonnax 22771-12K. 

The detent ball in the valve body in listed Chrysler transmissions wears into the aluminum bore due to continuous movement and vibration of the linkage. This creates excessive looseness in the manual valve lever and allows the manual valve to move out of alignment. No start or being stuck in Park can occur from the manual valve being out of position due to extra clearance. This condition often requires that the valve body be replaced.

Sonnax valve body detent ball and sleeve kit 22771-12K allows the valve body to be salvaged. The bore must be oversized using the self-guiding bench reamer included in Sonnax tool kit 22771-TL12. A .096″ diameter drill bit is also included to allow the retaining pin hole to be redrilled for use with the OE pin. Sonnax detent spring 22771-36 is also available.

  • Precision steel sleeve restores worn valve body and properly supports the detent ball
  • Precision-ground steel ball included for optimal fit with the replacement sleeve
  • Self-guiding bench-style reamer allows casting to be oversized quickly and accurately without specialized equipment
Although this fix is compatible with 48RE units, the bore diameter in some units will be smaller and may cause potential reamer piloting issues.

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 5 in

You may also like…