48RE Electronic Throttle Valve Actuator, 2005-On (5.9L Diesel)

$ 765.00

SKU: CC D22460G, TS D22440, a15 ra b1 Categories: , Tags: ,

Description

48RE Electronic Throttle Valve Actuator, 2005-On (5.9L Diesel)

Preventing 48RE Transmission Throttle Valve Actuator Codes

In 2005, Dodge started using a transmission throttle valve actuator (TTVA) instead of a TV cable on the 48RE Diesel 2500 and 3500 Ram trucks. The actuator, mounted to the case above the throttle valve shaft, includes two potentiometers. These provide input to the ECM as well as a DC motor that responds to ECM output. The bottom of the TTVA shaft features a D-shaped opening that fits onto the throttle shaft. This allows the actuator to mechanically stoke the TV valve and ultimately control transmission throttle pressure.

However, there are no adjustments for the TTVA; you must initialize it when you replace or remove and reinstall it on the transmission. Every time the ignition is cycled on, the ECM performs the internal calibration procedure to find the current “zero” position. To initialize the TTVA, hold the ignition in the “on” position for at least 30 seconds.

During the calibration procedure, the ECM is looking for at least 48 degrees of movement from minimum to maximum span and to establish a minimum range value. Both of these parameters can be affected by the throttle shaft adjustment bolt on the pressure regulator spring retaining bracket. The distance between the bracket and the inside edge of the adjustment bolt head should be .905″. Additionally, a shorter distance will not allow the TV shaft to travel far enough to satisfy calibration parameters and will set a code P1751 and/or P1752.

Here is where you can easily get into trouble. Some of the cable-activated throttle valve brackets have as little as .820″ between the bracket and the inside of the adjustment bolt head. Using the cable type bracket set up in a TTVA equipped unit without changing the setting on the adjustment bolt can set the same codes.


Transmission Throttle Valve Actuator Code List:

  • P1749 – Transmission Throttle Valve Position Sensor Circuit Low
  • P1750 – Transmission Throttle Valve Position Sensor Circuit High
  • P1751 – Transmission Throttle Valve Position Minimum Range Performance
  • P1752 – Transmission Throttle Valve Span Performance
  • P1753 – Transmission Throttle Valve Mechanical Performance
  • P1754 – Transmission Throttle Valve Actuator Stuck
  • P1755 – Transmission Throttle Valve Control Circuit

Click Here For More 48RE Products!

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 5 in